I was seeing this on 08.31 as well. Even with B@HWC topology, clients would sometimes end up on the AP's vlan even when assigned the correct role. Usually cleared up with a disassociate/reassociate. Does that sound like what you're seeing?
I upgraded to 08.32.01.0035 this morning and - so far - haven't seen any clients assigned an IP from the AP DHCP pool, though haven't had chance for more than a couple casual glances... Derek Johnson | Data Communications Coordinator FORT HAYS STATE UNIVERSITY 415 Lyman Dr. TH 101, Hays, KS 67601 (785) 628 - 5688 | [email protected] From: John Kaftan <[email protected]> To: "Enterasys Customer Mailing List" <[email protected]> Date: 11/12/2013 02:35 PM Subject: [enterasys] Wireless 8.31 Bridging at AP unexpectedly Hello: We have upgraded to 8.31 and are now managing our policy from PM. We are having issues with some APs bridging some clients at the AP. I assume that is what is happening because clients are getting on the same network that the APs are on. This should not be the case because all of my VNS topologies are bridging at the controller. It is pretty darn freaky since that setting is set a the WLAN Service\Role level. Has anyone else seen this issue? I'm freaking. This causes big problems as security is bypassed as well as the wireless clients are eating up all of the IPs on the LAN network and my wired clients cannot connect. -- John Kaftan IT Infrastructure Manager Utica College --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
