Hi, that looks like either NetSight does not think it has SNMP write access to the switch, ot that there actually is no SNMP write access configured on the switch.
You can check the NetSight side via the device access table. On the switch you can use "show snmp group", "show snmp user", and "show snmp community" to check. You should have a device access profile with write credentials configured in NetSight, and the same credentials configured on the switch. HTH, Erik -- Dipl.-Inform. Erik Auerswald http://www.fg-networking.de/ [email protected] T:+49-631-4149988-0 M:+49-176-64228513 Gesellschaft für Fundamental Generic Networking mbH Geschäftsführung: Volker Bauer, Jörg Mayer Gerichtsstand: Amtsgericht Kaiserslautern - HRB: 3630 On Tue, Feb 17, 2015 at 03:28:46PM +0000, [email protected] wrote: > Hi Everyone, > > I test a 800-Series with Netsight and I have some problems. > > When I want to add some Vlan, I always have this error : Insufficient Access > Level to perform SET with given Profile. > It's the first time we use this series on netsight. > > Have you some idea ? > > Thanks > > Geoffroy HUGUENIN > CEA VALDUC > VA/DSTA/STLI/LSIS > 21120 IS-SUR-TILLE > Téléphone : 03 80 23 77 80 > > --- > To unsubscribe from enterasys, send email to [email protected] with the body: > unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
