Are these Mac's both firewire capable? If so, why not use this nifty utility: http://www.apple.com/downloads/macosx/system_disk_utilities/carboncopycloner .html
This is a hard disk cloner - and it really works! (I used it last week to port my drive image from a old TiBook to my new TiBook. Here is how you do it: Download the program to your OLD mac Start up your NEW Mac in Firewire mode (hold down the "T" key when you power on Start up your OLD Mac normally Connect a firewire cable Run CarbonCopy Cloner and follow the prompts. Depending on drive size, you will have a clone of your old files on your new Mac un under a hour (60GB PowerBook G4 drive). I only found one small glitch in this cloning process: FinalCutPro needs to be COMPLETELY removed and re-installed. (yes, even the LIBS and Prefs - do a "Find" on "Final Cut Pro" and trash everything related to the software except project files ) -- Hope this helps! Bob If so, get On 11/13/02 19:59, "Lee Hinde" <[EMAIL PROTECTED]> wrote: > I'm moving my stuff to a new Mac tomorrow. My copy of Office was installed > over an upgrade. What trauma am I going to have moving it to the new computer? > > Thanks. > > (I tried Mactopia, but the FAQ that looked closest returned a page not found.) -- To unsubscribe: <mailto:Entourage-Talk-Off@;lists.letterrip.com> archives: <http://www.mail-archive.com/entourage-talk%40lists.letterrip.com/> old-archive: <http://www.mail-archive.com/entourage-talk%40lists.boingo.com/>
