Lukas Lauw wrote:
You can always use a flash meter to gauge the flash output whether the flash
is on or off camera. Triggering the flash is done by depressing the test
button on the flash or on the ST-E2. Hope this help.
Luke
____________________________________________________________________________
Yes Luke, but the preflash will pre-trigger the flash meter and you will get
an erroneous meter reading. You need to set the flash to manual mode in
which
case the output will be one flash and then you can use your meter to
determine
exposure.
Peter K
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
