--- Pawel Nabe <[EMAIL PROTECTED]> wrote:
> I keep reading that you loose A-TTL with bounce
> flash.
> Is this true for all bodies (that support A-TTL)?.
> When I dump the exposure data that my EOS 600 (630)
> stores with its Technical Back E, then I always
> see 'A-TTL' in Programm mode. I use bounce flash
> all the time. However if I switch to Manual mode
> or use the Macro Ring Lite then 'TTL' gets stored
> just as expected.
> So I don't seem to loose A-TTL with bounce flash.
Hi Pawel,
Check the post at the following url:
http://www.listquest.com/lq/view.cgi?ln=canoneos&mid=79223&sp=&q=gary+fisher+430ez+540ez&b=1&s=1&a=1&o=0&x=17&y=7
It's comparing the differences between the 430EZ and
540EZ flashes. The middle paragraphs are the relevent
bits here - I'm expecting to find that you're using a
430EZ (or maybe a 420EZ) as it gives the A-ttl
pre-flash in bounce mode - a feature disabled with the
540EZ.
I wrote that message relating to using both flashes
with an EOS 5 (A2e) - I imagine it's much the same
with a 600.
Does that post describe your situation?
Regards
Gary
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
