On 24 Aug 02 at 16:15, Tom & Valerie DelRosario wrote:
> > Whether T3-60, N3-60 or RS-60, they all use 3 ordinary wires
> > (common/shield (bare copper), white & read IIRC)....the real trick
> > consists in finding a good 3-pole connector....the 3.5mm stereo jack
> > plug used on the lower range of camera's is not a real good one
> > (bayonet 'N3' is used on the higher end (successor of the old
> > threaded 'T3' nightmare))....can easily be misaligned,
> > shorts/switches while inserting, and can't stand much soldering heat
> > either. Only thing worse is a 2.5mm stereo jack plug....8-))
> >
> Can't you just buy an extension cord (stereo plug to stereo plug) from Radio
> Shack? You won't have to deal with chopping or soldering that way.
Yes, the RS/3.5mm plug can be (cheaply) extended without
slicing/soldering of course, only the T3 & N3 can't do without....
--
Bye,
Willem-Jan Markerink
The desire to understand
is sometimes far less intelligent than
the inability to understand
<[EMAIL PROTECTED]>
[note: 'a-one' & 'en-el'!]
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
