Henrik Porsbring wrote:
Hello! I have used the above combo for a while now with E-TTL. Seems to work fine normaly but not anymore. The pictures come out way too overexposed (two or three stops!) I'm quite confident with using the flash set to manual but one shouldn't have to, right? As it is I tend to prefer my good old Metz 45 CL-1. No cosmetic features, just pure rock'n'roll! ------------------------------------------------------------------------ ----------------------------- I have seen strange problems like this with a 40MZ-3i I used to own. I assume you have the 3102 SCA module, so you might try to take it off and re-install it. Putthe flash on the camera then power the flash on first then the camera. Sometimes my 40MZ would get stuck in a mode, I would swap between Auto and E-TTL and eventually the flash would respond. Does the modeling light work as it should when the flash is on the camera? Peter K * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
