Hello, I have Equalizer 1.0 beta running on a 4 node cluster connected to 7 NVIDIA Quadro Plex units that in total drive 25 horizontally interlaced passive stereo displays. The G-Sync II cards in the Quadro Plex units are all connected properly with cat5 and I am able to enable framelock across all the Quadro's. I have verified with NVIDIA that I have a proper setup.
My problem arises when I try to run an Equalizer app on the cluster with a config file wherein I've enabled NV_barrier and/or NV_group. If I set NV_barrier and NV_group to 1, the eqPly starts but I only get a black screen. If I set NV_barrier to 0 and NV_group to 1, I also get a black screen. If I set NV_barrier to 1 and NV_group to 0, eqPly will run, but I get this output: 9332 eq::Pipe::P /home/matt/Equalizer-1.0-beta/libs/client/glXWindow.cpp:686 16022 Entering untested function GLXWindow::joinNVSwapBarrier 9332 eq::Pipe::P /home/matt/Equalizer-1.0-beta/libs/client/glXWindow.cpp:727 16022 Failed to bind swap barrier 1 The NV_barrier fails and eqPly runs without framelock. Any suggestions on what I might be able to do to correct this would be very much appreciated. Thanks! -- View this message in context: http://software.1713.n2.nabble.com/glXWindow-NV-barrier-not-working-Failed-to-bind-swap-barrier-1-tp6228668p6228668.html Sent from the Equalizer - Parallel Rendering mailing list archive at Nabble.com. _______________________________________________ eq-dev mailing list [email protected] http://www.equalizergraphics.com/cgi-bin/mailman/listinfo/eq-dev http://www.equalizergraphics.com
