Re: [COUPERS-FLYIN] trim wire for da coupe

Dan Hall @ cox Sat, 12 Jun 2004 00:43:48 -0700

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

Dennis & Ed,

I have the same spinner on my Coupe and have had no problems in 1200 hours, although so far I've not pushed on it.

Dan Hall

N3968H

----- Original Message -----

From: Ed Burkhead

To: Coupe-List

Sent: Friday, June 11, 2004 10:05 PM

Subject: RE: [COUPERS-FLYIN] trim wire for da coupe
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Oh, that reminds me. I had a bullet shaped Cessna spinner on my Coupe for 22 years. I guess its still there. Solid as a rock. I pushed that plane around a lot by pushing on that spinner before I learned better (and not by breaking it).

Could work nicely for a temporary fix and looks better than no spinner at all.

Ed Burkhead

http://edburkhead.com/

[EMAIL PROTECTED] (remove the QQQ)

-----Original Message-----
From: Hartmut Beil [mailto:[EMAIL PROTECTED]
Sent: Saturday, June 12, 2004 12:00 AM
To: dennis spiegel; [email protected]
Subject: Re: [COUPERS-FLYIN] trim wire for da coupe
 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 
Dennis.

You can fly the Coupe without a spinner. That would temporarily solve your backplate problem.

And trim wire is available from Skyport, if your local FBO does not have it. It was around $25 when I bought one a few years ago.

Hartmut
----- Original Message -----

From: dennis spiegel

To: [email protected]

Sent: Friday, June 11, 2004 7:23 PM

Subject: [COUPERS-FLYIN] trim wire for da coupe
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi All ,,,My plane is in the very final stages of finishing touches after a lenghty repair and paint job.While frying to free up my trim( after sitting for 8 months) my mechanic ,slash painter broke my wire.Where would be a very fast place to get wire and put it in 2 morrow.and I need a spinner back plate as mine is cracked all around.This is the only thing stopping me from flying 564 to the nationals. Oh ya and paying a bunch of money for the repairs and paint. (so I won't eat at the nationals at least I flew.)When I took the coupe to Wis for the restoration fuel was 2.50 a gal now it's $ 3.50 or so It SUX too!!!

I'm in Ill any quick Ideas on trim wire let me know I'm flying up in the morning if the Stinkin rain stops.I could fly her home if the shake down cruise is satisfactory.BTW if any of you are near 06c Schaunburg airport We are having a pig roast and picnic This sunday come on over I'll pick up the tab for any Couper in the area.Lotsa food and refreshments- Don Mack see ya there OK ?? spread the coupe word dennis- President Schaumburg Pilot's Assoc 06c come on Joe Czaplicki come on down

Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/

Re: [COUPERS-FLYIN] trim wire for da coupe

Reply via email to