----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
All the other ADs should have been incorporated into the design by then. Don't forget to look up the engine ADs. Correct on the prop. Kevin -----Original Message----- From: stephen coffey [mailto:[EMAIL PROTECTED] Sent: Monday, October 25, 2004 4:33 PM To: [email protected] Subject: [COUPERS-FLYIN] AD's, Prop Stuff ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- First, thanks for the responses on the AD list. There appear to only be 2 AD's, which seems a bit odd (wing AD's). I asked an RPM question a week or so ago, and was directed to my prop, and the tach. I've only made it to the prop thus far. One of you had said I was "looking for something around 7153". What I've got appears to be 7148. I'm assuming that the first two numbers are length, and the last two are pitch, right? Also assuming that, like in boats, lower pitch numbers= higher low end (climb), less top end (cruise), AND that RPM's increase as the prop goes from a speed prop to a power prop. Are these assumptions close? Thanks, folks! Stephen Coffey ========================================================================== == == To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/ ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
