----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Hi Kevin; I dug through the pile this morning and found the part numbers for the inspection plates/components.
Part Part Number
4 inch opening cover 415-13280-03
" back up ring -13280-01
3 inch opening cover -13281-03
" back up ring -13281-01
# 8 nut clips C8102-832
#8 Stainless screws AN526C 832R8
#8 Nylon washer 04-00217 (aircraft Spruce Number)
4 inch opening assembly -13280-00
3 inch opening assembly -13281-00
If you do not have the beaded skin, you will need all 4 inch opening assemblies. However, if you have the beaded skin, you will need 2 of the 4 inch and 2 of the 3 inch for each stub wing. I listed the individual part numbers first in case you just need one part. However, if you are preparing to install the whole thing, it is less expensive to order the assembly. You get both the back up ring and cover for about $7.
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
