----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hey Steven,, WELCOME TO AVIATION. and GOOD LUCK Dennis ercoupe564 --- Steven Finkelman <[EMAIL PROTECTED]> wrote: > ----[Please read http://ercoupers.com/disclaimer.htm > before following any advice in this forum.]---- > > > This business of refurbishing airplanes is a real up > and down > affair (pun intended). > > No sooner do I find upon dismantling my engine that > the parts are > in better shape than expected, I am stripping my > engine mount > and I notice one of the tubes is bent. > > Those who have been following this thread will > remember > that the plane was put into a gopher hole in the > late 60's and > repairs made at that time. Those repairs already > caused me to > question the skills of the mechanic who did it since > there is a crack > in the weld on the lower nose gear tube where it > attaches to the mount. > Now I realize that although they replaced one tube, > they must have just > hammered the other back into place. > > I have a certified shop here that can handle the > repairs at $$$$$ but I > was just wondering if anyone else has had a similar > experience and > can lend any advice. > > Steve Finkelman > C-FIWR > > ========================================================================== ==== > To leave this forum go to: > http://ercoupers.com/lists.htm > Search the archives on > http://escribe.com/aviation/coupers/ > > > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
<<attachment: winmail.dat>>
