----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
This message was automatically forwarded
on behalf of Bill Bayne. Please address any responses to the mail list or
directly to Bill at: [EMAIL PROTECTED]
From: William R. Bayne [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 01, 2006 7:55 PM
To: Ed Burkhead
Subject: Re: WRB Re: [COUPERS-FLYIN] FW: Rudder horn lube point
rlyflyin
Hi Darick,
Superseding my earlier response to you via FLYIN on Jan 26, 2006, at 14:56:
Looking for something else, I stumbled across an actual "factory cover" for your 3/4" hole!
From Fig. 1 of Ercoupe Service Memorandum No. 42, a 3/4" Button Plug is 415-40589-1.
In 2004 this was still available from Univair for $1.55. John (Skyport) may also stock it?
Regards,
WRB
--
On Jan 26, 2006, at 10:41, Darick Gundy wrote:
Hi folks,
There is a +/- 3/4" diameter hole on the top center of the horizontal stabilizer which I believe it a lubrication point for the rudder bell crank. This hole is not covered with anything on my coupe. Is there a factory cover for this hole?
Thanks for any info,
Darick
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
