----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I wonder if there is some
silicon residue on the windshield or the windshield rubber. A little
silicon will keep almost anything from sticking.
Tom
Jackson
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 20, 2005 7:45 AM
To: [email protected]
Subject: [COUPERS-TECH] Re: Windshield Rubber glue
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hey Couper's: I am having problems installing a new windshield (Bubble)
because the glue does not hold the windshield rubber to the inside of the
window. I have tried 3-M weather strip adhesive, and Goop automotive glue with
the same results.
I put on the adhesive and let it dry for at least
24 hours. Then install the windshield. It looks great. Then about 2 or 3 days
later, the inside of the rubber starts peeling off the windshield. I thought I
have followed all the directions, but obviously I need something different. What
do you all recommend?
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
