----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
In all cases to do with A/C bolts and nuts the nut is placed on the back side and on cases where the bolt is vertical they are always placed on the bottom. This is the rule unless it is impossible to do. Dick & Nancy [EMAIL PROTECTED] ----- Original Message ----- From: "Ken Townsend" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, January 15, 2003 5:46 AM Subject: [COUPERS-TECH] Wing bolts > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > Hi all, I have taken the wings off my Alon and am in the process of > having an annual done. I have a couple of questions for you all. > > 1. When replacing the wing bolts, should a person use any anti sieze or > grease? > > 2. The bolts had the nuts at the back side of the plane. Does it matter > if these are installed with the nuts to the front? (I think they will be > easier to remove in three years if that is done.) > > By the way, a long extension with a 15/16" socket is needed and a 1" box > end for the nuts with the "standard ...nut to the back...set up).. > > CU > Ken Townsend 6567Q > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
