----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
OK folks, this is really simple. If you want to leave the mailing list, I have thoughtfully set up the list such that the instructions are attached at the END OF EVERY MESSAGE. This person has taken it apon herself to respond to every single message with the following. Let me tell you something. Screaming and yelling that you want to leave a building while standing in front of a big exit sign just makes you look stupid. EVERY SINGLE MESSAGE HAS A LINK TO INSTRUCTIONS ON HOW TO REMOVE YOURSELF FROM THIS LIST. The instructions work. The web page with instructions exist for a reason. The instructions exist so that every person is granted the ability to join and leave at will. I have taken pains to make the instructions as simple as possible. You click on a link. You send the message that is generated. It works 95% of the time. I do this list as a volunteer service. I have a real job. I don't have time to hold the hand of every single person who refuses to follow directions. That said, if for some reason the instructions are not working, and you have tried to resolve your issue without success, *please* contact me then. I will be happy to oblige. You can ask many people on the list who I have helped out directly. But 95% of the time the instructions work. So please, don't make an idiot of yourself yelling at all 300 people that you want to be removed from the list, just READ and FOLLOW THE INSTRUCTIONS. -Tom ----- Original Message ----- From: "Linda DAmico" <[EMAIL PROTECTED]> To: "Randy Helm" <[EMAIL PROTECTED]>; "Ercoupe" <[email protected]> Sent: Friday, January 17, 2003 6:52 PM Subject: $$Msg-Id:200301181054060309.tmp$$Re: [COUPERS-TECH] vacuum & static Approval request for list: <[email protected]> from user: <[EMAIL PROTECTED]> REMOVE ME FROM YOUR MAILING LIST >----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > >Does anyone know what works to connect to the existing static line (from >where it comes into the airspeed indicator) and continue it on to run a >couple of other instruments. I plan on attatching tubing over the >existing line and on to the verticle speed and altimeter. Has anyone >done this before. Any ideas on what size tubing works best. >Also I am planning on installing a double venturi so I can run a DG. >Can I have one venturi on each side? >Thanks, Randy >àààààààààààààààààààààààààà >To leave this forum go to: http://ercoupers.com/lists.htm > > > > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
