Re: [COUPERS-TECH] coupers-tech

[MAGIC VAC]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Well Cecil,     My Coupe developed a shimmy, and I couldn't seem to find any way to cure it until, that is, I had the front wheel balanced.  Best thing I ever did.  Mine had got to the point that I thought it was going to break something.  I'd hold full back on the yoke till it slowed down to minimize the wobble, but the balancing job cured it all.   Larry ----- Original Message ----- From: cecil myers To: tech@ercoupers.com Sent: Saturday, May 31, 2003 8:42 PM Subject: [COUPERS-TECH] coupers-tech ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Just wondered if anyone has cured nose wheel shimmy . after the center section corrosion inspection and annual inspection N87435 shimmys on both takeoff and landings . all nosewheel components seem to be tight as can be.    Push rod was checked for end bearing play , both were good . now what?  It didn't shimmy before  the Inspections ... got me puzzled  HELP anyone                                                   Cecil Cecil Myers Ercoupe N87435 Bowling Green, KY The new MSN 8: smart spam protection and 2 months FREE* ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/ ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/