----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
The stuff basically consists of phosphoric acid. Here are a
couple of MSDS sheets. I suspect the stuff Polyfiber sells conforms to the
mil-spec, but I cannot find a bottle right not to confirm this. I'd not want to
leave this liquid trapped in faying surfaces when I'm done.
Cheers:
Paul
NC2273H
following any advice in this forum.]----While doing the Center section AD, my mechanic wants to tend to the light serface corrosion in accordance with AC 43-4A. This AC basically says to remove it by mechanical or chemical means. It matter of factly suggests that light corrosion can be removed chemically by using Corrosion removing compound MIL-C-38334, Type 1. Any one have any ideas where to aquire this material, or the FAA equvilant?
Earl Schell
N93826
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
