RE: [COUPERS-TECH] Airwolf oil filter

[Kenneth D Doyle]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

Robert,

 

I put a spin-on oil filter on my Alon Aircoupe.  It is mounted directly to the side of the engine.  It is not remote like the Airwolf.  I use champion oil filters which I order from Aircraft Spruce or from an outfit in Tulsa, but I forget the name.  There is an STC for the Alon.  I suspect it is a lot less hassle than the Airwolf, there are no extra hoses filling up the engine compartment, and it is easy to change out by myself.  Just a bit more simple than the Airwolf, and probably just as good.  I think I read a review on oil filters once and my recollection is that the Airwolf didn't really perform better than what I ended up with.  I probably can fine some info on the installation if you need it.

 

Ken Doyle

Springfield, Mo

Alon N5477E

 

 

----- Original Message -----

From: Robert Q. Steinman, PhD

To: Talk

Sent: 11/12/2003 9:12:58 AM

Subject: [COUPERS-TECH] Airwolf oil filter

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

Please help, does and or will the Airwolf remote mounted oil filter, for the C-85 fit and work on a 1948 Ercoupe N3520H.

Including all gauges, oil temp, oil pressure and so on.

Thanks for your help I do not want to spend $400.00 if it is going to be a pain to install.

 

Robert Q. Steinman, Ph.D. N3520H

 

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/