Re: [COUPERS-TECH] Stromberg float setting

Fri, 2 Jan 2004 08:47:54 -0700 

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Thanks Ted,
 
I pulled it off the other day and it's over at the local AP now.  I'll pass the info on to him.  Roger
----- Original Message -----
From: Mary Lechner
To: [email protected] ; roger anderson
Sent: Thursday, January 01, 2004 7:11 PM
Subject: RE: [COUPERS-TECH] Stromberg float setting

Hi Roger--According to supplement P/L No. 380172-2 of Stromberg model NA-S3A1 OVH manual, fig s-5 shows float level setting to be:  13/32 +- 1/64 inch with 0.710 spec. gravity fuel @ 2.0 to 4.o psi head. minimum needle travel 0.021 inch. That distance is measured from the parting surface of main body to the fuel level in float chamber. Roger, good luck, The only time I set one for a yellow tag carb was at school!! Ted, Sacramento,Ca.
----- Original Message -----
Sent: 12/30/03 3:55:42 PM
Subject: [COUPERS-TECH] Stromberg float setting

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

 
--- Mary Lechner
--- [EMAIL PROTECTED]
--- EarthLink: The #1 provider of the Real Internet.
 
Does anyone know what the correct float setting should be for a Stromberg on a C85?  Thanks...roger
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

Reply via email to