Title: Re: [COUPERS-TECH] bolt question
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
on 04/15/04 9:14 PM, Steven Finkelman at [EMAIL PROTECTED] wrote:
Hi Steve,
Ercoupe data says the two top bolts (415-40400-12) are AN6-41 and the two lower ones (415-40400-13) are AN6-43. These were used with AN310-6 nuts, AN380-3-3 cotter pins and AN960-616 washers, 4 ea.
Forney Service Manual just says these are "3/8" bolts", which are initially tightened only until they can be cotter-pinned. "After operating the engine, readjust these for minimum engine vibration". Yeah, un-huh.
Regards,
WRB
-----------------------------
Can anyone tell me what size bolts are needed to mount an engine to the engine mount.
I removed my engine a year ago and now notice that the bolts I took out were all
different sizes... I can't figure out why and I don't want to start looking for bolts once
I swing the rebuild engine into place.
Thanks
Steve Finkelman
C-FIWR
Forney F1
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
