----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
TRIM-O-Matic. Service Memorandum #54 is covering the installation of the unit, it also mentions part 415-52190 as a plate you are supposed to install on the floor mat. Hartmut ----- Original Message ----- From: "R M Finch" <[EMAIL PROTECTED]> To: "'Ercoupe Technical Discussion (moderated)'" <[email protected]> Sent: Monday, May 31, 2004 11:17 AM Subject: [COUPERS-TECH] Another Trim Cable question > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > I have a 1965 Alon Aircoupe, model A2. > > For this year's annual inspection we want to replace the elevator trim > cable. What to use? I've reviewed previous emails on the list about > trim cables, and am confused about the apparently two different types > (Bowden and something else), different diameter wires, and so forth. > > Univair's 2003 printed catalog lists a "Trim Control Wire", P/N > 52070-33, and an "Elevator Trim Cable", P/N 52268, and different "Trim > Wire Conduit[s]" for different serial numbers, none matching the Alon > S/N. Their online list additionally has an "ercoupe trim cable", P/N > 52146, for only $8.17 (the other assemblies run $30-$40), so I wonder > what that is. Oooh, online also has an "ercoupe trim-o-matic" P/N > 52190; sounds magical, and only $11.45. Would it help me fly-o-matic? > > What to use? > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers-tech/ > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
