----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Would something like West System's epoxy work?
Jean-Louis Jugeau "Louis"
703 490-0175
"ray anderson"
<[EMAIL PROTECTED] To:
<[email protected]>
et> cc: (bcc: Jean-Louis
Jugeau/GD_AAAV/GDAS)
Subject: Re:
[COUPERS-TECH] fuel level indicator float
06/04/2004 10:44
Please respond to
"ray anderson"
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice
in this forum.]----
Just a caution,
I've built 6 homebuilts and 4 had tanks built with
foam-glass-epoxy construction. Home builders discovered the hard way that
the interior of tanks couldn't use just any epoxy. There are several that
are impervious to any fuel and small containers can be found at any
homebuilder supply house. Don't use Wal-Mart or such supplier epoxy for
tank
use. I still haven't had a problem with Indian Head ( this was used before
WW2 and long before epoxy was developed) but you can't go wrong with the
PROPER epoxy.
----- Original Message -----
From: "Greg Bullough" <[EMAIL PROTECTED]>
To: "ray anderson" <[EMAIL PROTECTED]>; <[email protected]>
Sent: Friday, June 04, 2004 9:13 AM
Subject: Re: [COUPERS-TECH] fuel level indicator float
> ----[Please read http://ercoupers.com/disclaimer.htm before following
any
advice in this forum.]----
>
>
> At 10:05 AM 6/4/2004, ray anderson wrote:
>
> >Available at most auto supply houses. Some now use fuel resistant
epoxy.
> >Shellac works for me.
>
> Note that Shellac is not impervious to some of the things that find
their
> way in to auto fuel. If you are planning, or even think you MAY run
> autogas, use epoxy.
>
> Again, you can pick it up at the hobby shop, though I think all epoxies
> are basically resistant to gasoline and anything found in it.
>
> Greg
>
>
==========================================================================
==
==
> To leave this forum go to: http://ercoupers.com/lists.htm
> Search the archives on http://escribe.com/aviation/coupers-tech/
>
>
>
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
