----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
> Only having a monopoly (i.e. owning the type certificate) could possibly > justify $2000.00 for $20.00 worth of sheet metal and several hours of labor. > There's actually quite a bit to a complete set of baffles if you've ever installed all the inter-cylinder tin, you know what I mean. <Grin> A couple of alternatives-------check with V. Gregory for used. [EMAIL PROTECTED] 802 796 2605. Or have your mechanic contact John Wright Jr. for installation advice concerning the substitution of Cessna 150 intercylinder baffles. If you mechanic is comfortable with installing the Cessna stuff then this will save a few bucks. Personally I am not, but it is an option. As you've said much of it can be made from sheet aluminum. We had a chap who was posting original Ercoupe blueprints on a web site. Is he still around? any baffle prints?? Is anyone in the overhaul stage and might have the baffles handy to make a pattern? I "Might" have some scrap stuff suitable for a pattern up in the rafters. I'll check this evening. Good luck Paul NC2273H ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
