On Aug 30, 2004, at 1:52 PM, Norm wrote:
Hello All
Im replacing the 2 sliding side windows and am wondering if anyone has the specs on the original size of the plexi or lexan needed to replace. Ive measured the one I took out and it is 19.5X32". The other on the pilots side is a different size, about 19.5X30". Im thinking maybe they should be the same but dont want to void the warranty by changing the size without checking...*S*. Any help would be appreciated!! Thankyou!
Norm
Hi Norm, Robert...
Sorry for the delay.
Per Drawing 415-53011 (for sidescreen), ERCO used .065 Vinylite, 19-3/4" (+-
1/32") x 31-3/16" with a 1/8" radius on all corners. Hole (#27) centerlines
were 5/16" along the (short) edge.
I like using the sunshade (third center piece, can be solid aluminum or (my preference) plexiglas with mirror-film applied inside after installation. The one I measured was made with material 19-11/16 wide by 24". With a sunscreen, sidescreens don't need to be long enough to close at the top (unless you remove the sunscreen at times)
If sidescreens used with a sunscreen are shortened 11 1/2" material needed and weight are reduced, and sidescreen/airframe interference getting in is greatly reduced.
Regards,
WIlliam R. Bayne
<____|(o)|____>
(Copyright 2002)
