Begin forwarded message:
From: William R. Bayne <[EMAIL PROTECTED]>
Date: September 12, 2004 11:56:39 PM CDT
To: COUPERS-TECH <[email protected]>
Subject: Re: [COUPERS-TECH] Control Quadrant
Reply-To: William R. Bayne <[EMAIL PROTECTED]>
I said:
The original cables were part numbers 415-52148, later 415-52132 and 415-52172 and either 7-13/16 or 7-15/16 (measured from inside cable sleeve to inside cable sleeve). On Forney cables, F-52132 and F-52172, above measurement was 8.187 (measured the same way) "to prevent binding" per F.A. 211 of 2-24-58 effective Serial Nos. 5634 and up.
My inclusion of the "52132" in the above was misleading, as it is not a cable. It is the bent tab incorporated in one end of each cable assembly.
Sorry,
WRB
