----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
From: Tommy Terry [mailto:[EMAIL PROTECTED]
Sent: Saturday, September 25, 2004 7:03 PM
To: [email protected]
Subject: [COUPERS-TECH] Elevator control connection
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
This is another “which way does it
go” question.
During this annual that is beginning
to look like it will take a year, we have found yet another thing we are not
sure of. The bracket/arm on the
bottom of the elevator that the control rod connects to has two holes in it.
When we took the tail assembly off
of the airplane we noted that the rod was connected to
the forward most hole. As we are
preparing to re-install, I have noticed that the rear
hole has a bushing in it and the front does not. I have
consulted the service manual and the illustrated parts book with nothing
definitive. One of the photos in
the parts book looks like the control rod goes to the back hole and a cable that
I assume is an old style trim control hooks into the front. Can any one verify this?
Thanks
N93929
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
