----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
John; It'll peel off with a bit of help. A hair dryer to heat it up and some MEK to soften the adhesive. Get some plastic scrapers and just work it. BTW, let us know how you do with the wing walk paint. I personally like the sticky stuff. It's nice and even. Al ----- Original Message ----- From: "John Stevens" <[EMAIL PROTECTED]> To: "Ercoupe Technical Discussion (moderated)" <[email protected]> Sent: Friday, October 22, 2004 9:13 AM Subject: [COUPERS-TECH] Wing Walkway anti-skid removal > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > I am in the process of replacing the anti-skid material on the wing walkway > of my coupe. The original material looks like it was a sheet with a sticky > backing on it. I was going to use the "paint on" process to replace it. > > My question is does anyone have a good method of removing the old > material? My coupe is a natural metal one so I'm not too concerned about > removing paint etc. > > Anyone with experience here? > > Cheers! > > John - 415C (CF-RGD) > > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers-tech/ > > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
