----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Bill, In 1999 I asked Chris Bell, product support representative at McCauley, Textron for the propeller bolt torque for a CM7150 Propeller when used with a Continental C-85-12 (taper shaft) engine on a 1946 Ercoupe, noting that the service manual called for 120 inch pounds and that I suspected this was the torque for a wood propeller. He responded "the proper torque is 300-360 in.-lbs." Seems the same as your data. I have a copy of the message on file. His E-mail was [EMAIL PROTECTED] , Richard Blair N99997 Kingsland, Georgia ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
