----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


Don't be afraid to add an Adel or two when necessary.
AL
 
----- Original Message -----
From: Tommy Terry
To: [email protected]
Sent: Sunday, December 19, 2004 10:01 AM
Subject: [COUPERS-TECH] Trim cable

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


93929 is finally back in the air, sort of.  After 3 months of annualizing, I made the test flight on Wednesday.  The only problem I could find was the trim cable will not set still.

 

The sheath moves as much as the cable itself.  The book only calls for one adelle clamp in the horizontal stabilizer and it is there.  Any ideas out there?

 

Tommy

N93929

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/



==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/



Reply via email to