----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Ed Burkhead http://edburkhead.com <http://edburkhead.com> ed -at- edburkheadQQQ.com (change -at- and remove QQQ) -----Original Message----- From: William R. Bayne [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 09, 2005 5:56 PM To: Ed Burkhead Subject: WRB Re: WRB Re: [COUPERS-TECH] / [COUPERS-FLYIN] Useful load et al RLYTECH (WRB via Ed Burkhead's computer-I can't post directly) Please send responses directly to the list or to me, Bill Bayne @ <[EMAIL PROTECTED]> Hi Kevin (WRB speaking), On reexamination, I think you were too, but I managed to confuse myself in trying to consolidate the various sources of authoritative information together for Greg. It is now clear that I misread your post as coming from him (incorrect), and befuddled myself. After looking through the Bulletins & Memoranda, the Parts Catalog and the Service Manual, I was still lacking the "7.7 gal." capacity information. I guess my brain short-circuited before consulting the Type Certificates, and your contribution was a most welcome contribution and clarification both necessary and pertinent. Making sense out of all the bits and pieces of such information is not, for most of us (and certainly me) easy or, in all cases, possible. Trying to fully understand and properly respond in the "give and take" between the wealth of participants on these lists is an entirely different challenge, and one I am proving less adept. I'll try to do better! WRB -- On Mar 9, 2005, at 3:08 PM, Kevin Gassert wrote: > I think I was agreeing with you but not understanding why there was > still > some confusion. > > Kevin > > Hamilton/Clermont Co-Op of Boards of Education > 7615 Harrison Ave. > Cincinnati, Ohio 45231 > 513-728-7904 > IM kevinathcca > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
