----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Gang... And congratulations Bernie... It looks like Bernie's 'Coupe is one that has the steel tube MLG. Ours is the same, S/N 719. Question is how would you mount the 7/16" spacers on the oleo assy. I thought that the spacers were for use on 'Coupes S/N 813 and up, since they differ from the earlier 'Coupe MLG oleo struts. Does anyone out there run a 'Coupe S/N 813 and below with these spacers, and if so how where did you mount them? Cheers Bettina and Bob CF-LAV ----- Original Message ----- From: Ed Burkhead <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] ; Coupe-Tech <mailto:[email protected]> Sent: Wednesday, April 13, 2005 8:58 AM Subject: RE: [COUPERS-TECH] My first Ercoupe! ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Bernie, Beautiful plane and congratulations and welcome to Couping and the family!
