----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


Sorry guys, I missed something.  I'm in the market for a prop, so whomever is offering, please contact me off list, I'd appreciate it.  Thanks
Al
 
----- Original Message -----
From: Wayne
To: Charles Waldo ; Ercoupe Tech
Sent: Tuesday, May 17, 2005 8:04 AM
Subject: Re: [COUPERS-TECH] Fwd: Prop

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


Charles::
This is a darn good price for a yellow tagged prop.  This prop configuration is the basis for a true performance prop, as the hub portion of a prop cannot be repitched, so repitching the outer portion of a 50" prop will give you the best of both worlds. low pitch, high RPM for climb out, and High pitch for economy cruise.  So think about it before you hastily discharge the offer.
 
Wayne Woollard----- Original Message -----
Sent: Tuesday, May 17, 2005 5:27 AM
Subject: [COUPERS-TECH] Fwd: Prop

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




Thanks for the offer but I think I'd rather have one of the below props as climb is a concern..........Anybody have on for sale?
 

7146 – extreme climb prop

7148 – normal climb prop


Chuck
Note: forwarded message attached.


==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/



==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/



==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/



Reply via email to