RE: [COUPERS-TECH] New question

[Wood, Percy]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

You might consider a "temporary," Chuck.  One that could be removed in case any problems raise their head.

If I have that hole correct in my mind's eye, it may be causing quasi-permanent carb heat.  Another thing to think about.

"Ye thing Ye don't see might be the thing that gets Ye"  -old English aviator saying

          Percy

 

---

From: Charles Waldo [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 15, 2005 6:28 AM
To: Ercoupe Tech
Subject: RE: [COUPERS-TECH] New question

 

 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 

I guess then a patch would be in order.....thanks Percy......
 
Chuck
94191

"Wood, Percy" <[EMAIL PROTECTED]> wrote:









I don't recall a hole in my "funnel" between the front of the cowl and the carb.
         Percy in NM, USA
 




From: Charles Waldo [mailto:[EMAIL PROTECTED] 
Sent: Monday, November 14, 2005 6:49 AM
To: Ercoupe Tech
Subject: [COUPERS-TECH] New question
 
 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 
Folks
 
  Its been a while since I've asked a question.....so here goes......I was replacing the air filter on my coupe and notice a small hole between the filter and the butterfly valve on the passenger side....about the size of my thumb......why is it there? It seems it would let unfiltered air into the carb from the engine comparment......should it be plugged?
 
Chuck
94191 
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/