----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
You can get them from Univair.
Syd
LeBaron Timothy wrote:
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Greetings all. I bought N99547 several years ago because it was my fathers back in the 60's. Athough it was in annual, it needed some work. With a career change and move from Indiana to Texas on the horizon it was put in storage. Now that things are starting to settle down a bit my thoughts are starting to get back to the coupe. I need help in two area's. First, I need to find a trailer in the Arlington, Texas, area to transport the coupe from Indiana to Texas. Second of all, while looking over the wings I found that the rear spar attach fittings were rusting between the spar and the fitting. I removed the fittings and remarkably the spar was in good shape, but the fittings are pitted bad and will need to be replaced. Does anyone have a clue as to were I can find replacement fittings? Or perhaps they can be fabricated out of 4130?
Any thoughts would be appreciated.
Tim LeBaron
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
