[COUPERS-TECH] Re: [COUPERS-FLYIN] windshield problem

Wed, 14 Dec 2005 17:21:13 -0800 

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Glen,
 
Been there, flown that. You need to do one more step to the windshield. You need to glue the rubber down to the fuselage. Then it won't lift up. Mine came like that.
 
bob branch
99891
----- Original Message -----
From: [EMAIL PROTECTED]
To: [email protected] ; [email protected]
Cc: Jose Luis Gibert
Sent: Wednesday, December 14, 2005 4:33 PM
Subject: [COUPERS-FLYIN] windshield problem

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Guys
 
I had a new bubble windshield installed recently.  During flight, it separates from the aircraft at the bottom, pilots side, maybe 5 inches from the metal bow.  It separates enough that I can stick my fingers out into the slipstream.  I tried gluing the bottom of the windshield to the rubber "sleeve" it sits in.  It still separates in flight.  Do I need to buy a new windshield?
 
On another note, I have a friend that wants to buy a really mint coupe, D or later.  Would prefer a very simple panel with just a com and transponder.  Would really like the original panel with the glove boxes.  Must have good paint and interior and a low time engine.  If you know of one, please let me know.
 
Thanks
 
Glen Davis CFII
Grumman Tiger N70GD
1946 Ercoupe N3103H
                |-----|
_________(*)_________
               o  o  o
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

Reply via email to