----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Bill wrote:
> Wrap the
jaws of a pair of Vise Grips with duct tape or
> electrical tape. Apply these to the gascolator fuel line,
> applying just enough pressure to close off flow. (This
> presumes the line is still flexible. Replace it if it is
not.)
> Take the fuel line loose at the gascolator and drain
> precisely one-half gallon into a calibrated container.
> Mark the new level on your fuel gauge.
Bill,
Why would you need to pinch the line?
My
gascolator had a drain valve. Why not just drain the fuel from the gascolator
drain into your accurate ½ gallon measuring container?
Ed
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
