----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I have found a source for the O 2 thin baffles that wrap around the cylinders. Stainless steel shim stock .005 thick. I purchased it locally in the Seattle area from Tacoma Screw Products. It is a roll 6" x 50". Cost around $24.00. Phone 1 800 562 8192. You can get it in thickness from .005 to .015 inches but .005 seems right. Univair wants $$$$$ for the thin cylinder baffles. Also found a good source for aircraft plywood. BD international. They run an add in the gen av flyer. My floor boards are all oil soaked, so I have decided to replace them. They have the normal 5 ply 1/4 inch 4 X 8 sheet or the way more expensive 12 ply 1/4 inch 4 x 4 sheet. Since the original boards are 5 , I bought the 5 ply. Regards. .....Varun ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
