----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I thought the green arc was to show cruise RPM
range? I was taught that you should apply carb heat whenever you are below
the green arc.
- Jason
From: John Cooper [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 13, 2006 9:26 AM
To: Fred Lamkey; tech
Subject: Re: [COUPERS-TECH] Tach question
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----At 03:34 PM 5/12/2006, Fred Lamkey wrote:
I know red line is 2275. My old tach had a green line from 2000 to 2275. What should it be?
Most tachs these days are marked green from normal idle up to redline, unless there is a restricted range somewhere, which there is not for Ercoupes. So, for the C75 green from 500 t0 2275 and a red radial at 2275 is appropriate.
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
