----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 02:58 PM 8/1/2006, [EMAIL PROTECTED] wrote:
The CM 7351 is a 1B90, so that's not the problem (spec wise).
What seems to rule it out is the max diameter of 71 inches.
You can always have it cut down to 71"
I guess the resultant anemic climb is why they ruled it out in the spec. Good
call.
Actually, it is due to vibration concerns. The prop and rotating mass
of the engine form a resonant system. At the higher RPM's (more
frequent power pulses) of the C85 there is a concern that dangerous
harmonics could be induced.
What would be the right prop for a C-85. What kind of money do I need to
budget for a prop?
A trim and repitch should run around $250 - $300 Otherwise figure on
$1500 - $2000
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
