----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
The fellow who had the inspection done at Hoquiam way. will be at the fly-in
this week end since he hangers his coupe there. He and the local mechanic
can fill you in on the info if you fly in. If not I will get the info for
you Sat. He is hard to get to since he works odd hrs. Dick L. 3041H
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 08, 2006 4:31 PM
Subject: [COUPERS-TECH] center section inspection in the northwest
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
All,
Does anyone know of a NDI technician in the northwest. I am at Crest (S36)
(near Seattle) however I could trailer the fuselage to Oregon if I have
to.
The wings are off now. Preferably someone with Ercoupe experience.
What started as a top overhaul has become a total restoration. 2203H was
a
complete and total unknown regardless of what the log books said. That
should translate to "big bucks". Every system will have been replaced or
overhauled.
So before I do any more airframe work I would like to make sure the center
section is ok. Any tech around 300 to 500 miles of Seattle would work.
Maybe I should say any reasonable Tech. And maybe there is no such beast.
Regardless any help on the matter would be appreciated.
Regards. ..Varun Khanna
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
