----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Eliacim,
There is a place in Tulsa OK that can weld up your old oil pump housing and
then remachine it to new specs for about 700.00. The material they use to
weld it up with is supposed to be better than original when done.
There is also a guy in wisconsin that has alot of yellow tagged stuff for
small Continental engines.
I could also check with my friend here in Sandwich, Il to see if he has any
good used ones on hand.
If you are interested in any of these I can go dig up more info for you.
Call me at 815 739 8686 if you want to talk
Randy Hougham
Grandpa's Ercoupe
NC87384
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, August 17, 2006 1:10 PM
Subject: [COUPERS-TECH] Source for C-75 accessory case
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
The shop is telling me my accessory case is no good.
Any sources for a yellow tagged C-75 accessory case, Continental PN
6726-A1?
Eliacim
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
