----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Eliacim,
I would try calling Divco in Tulsa, AZ. They
are the case experts. They are happy to answer questions.
When you're looking for cases keep in mind
that they made some of the cases out of magnesium and some out of aluminum. The
aluminum ones last alot longer than the magnesium ones.
Good luck,
Randy Hougham
Grandpa's Ercoupe
NC87384
----- Original Message -----From: heavensoundsSent: Thursday, August 24, 2006 10:44 PMSubject: [COUPERS-TECH] C-75 Accessory case puzzle----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Accessory case puzzle:1. The case removed from my C-75, which has a worn out oil pump, is stamped with number 67142. The case I got from Vernon Gregory (also from a C-75) is stamped 6726 and has the same faces (external to bolt accessories and internal to bolt to crankcase) as the 6714 removed from my plane, but the "cheeks" where the magneto gears would be look smaller than in the 6714.3. The Continental Overhaul manual lists the accessory case for a C-75-12 as 6726-A1 (also used on C-85-12 and C-90-12)I know from Rich Blair and Larry Fenton that accessory cases for C-75 through O-200 are supposed to be interchangeable. My overhaul manual lists a different case for the O-200, but when I ask about buying a new C-75 case the equivalent current part I get is for an O-200.I am wondering if there is an official document listing accessory case interchangeability so I can determine if the 6726 I got can really be used. I guess I will call TCM tomorrow and ask.Eliacim============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
