----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Hi Scott,
Your vertical speed indicator has a little adjustment screw in the lower left hand housing (at about 7:30 o'clock) that can be turned with a small common screwdriver in order to zero it. Do this on the ground with the plane not moving, with the engine off. Turn it a little and then tap on the indicator with your knuckle (to simulate the vibration generated by the engine,) then turn it a little more if necessary, etc., until it reads zero. Easy to do.
Syd
scott wrote:
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Hi Gang,My vertical airspeed indicator no longer registers zero - (-200fpm)The airspeed indicator appears to work normallyHow does the pitot static system work on the Ercoupe? Since there is no static port on the fuselage, I guessthe tube under the wing has the reference ports on it's sides. Is this correct?Is there a chance that the gage may just be clogged or....?....$$$$Thanks,Scott============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
