----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----This should be easy, Joey. You should be able to just straighten the bent tang on the star retainer washer and unscrew the special nut. You probably have to put a screwdriver into the slots in the nut and tap the screwdriver handle with a small hammer to loosen it. The wheel should just slide right off the axle. Be sure to let all the air out of the tire before you split the wheel to get at the bearing.
Syd
[EMAIL PROTECTED] wrote:
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Any ideas on the best way to remove the nose wheel from a 46 coupe with a single fork. Is this a really tight fit? I need to replace the bearing.
thanksJoey============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
