----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Hi Tandy,
The master cylinder is not a Cleveland part, it is an Ercoupe part.
John at Skyport has a new, better master cylinder than the old ones that
are in most of our Ercoupes. Contact him.
Syd
Tandy Allen wrote:
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Guys - I have been plagued with leaks in the brake system on my
Coupe. It has Cleveland brakes. I found and cured one leak in the
brake fluid reservoir but still have the leak. Although I am getting
good at bleeding the brakes I suspect the master cylinder is the culprit.
Looking at the Aircraft Spruce catalog I see that there are four
models of the Cleveland Master Brake cylinders: Model 10-35, 10-20,
10-19 and 10-5. It has been too cold here in Kansas to dig into the
brake system which, as you may know, requires removal of floor boards
and is not easy, so I haven't removed the master cylinder in place to
see what model it might be.
Question: of the model listed which is most likely to be the one
required to replace my existing (leaking?) one?
It sure looks like trying to replace the O rings is a lot less
expensive. Has anyone tried that and what has been the longevity of
the repair?
Tandy
------------------------------------------------------------------------
Never miss an email again!
Yahoo! Toolbar
<http://us.rd.yahoo.com/evt=49938/*http://tools.search.yahoo.com/toolbar/features/mail/>
alerts you the instant new Mail arrives. Check it out.
<http://us.rd.yahoo.com/evt=49937/*http://tools.search.yahoo.com/toolbar/features/mail/>
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
