----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I can only agree. Hartmut ----- Original Message ----- From: "David Douglas Winters" <[EMAIL PROTECTED]> To: "'Glenn Putnam'" <[EMAIL PROTECTED]>; "'ERCOUPE'" <[email protected]> Sent: Wednesday, March 14, 2007 7:52 PM Subject: RE: [COUPERS-TECH] short field takeoff ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- So, It appears that for no-rudder-pedal operations, I should remove the snubber cable on my nose gear so that I can maximize my nose wheel contact time with the ground as my nose comes up in crosswind take-offs. That way I can steer longer til my speed builds up. ddw -----Original Message----- From: Glenn Putnam [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 14, 2007 12:29 PM To: ERCOUPE Subject: [COUPERS-TECH] short field takeoff ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Those of you who ask how to make short field tateoffs need to go out and learn Ercoupe flying and the planes ability..Go out on a nice calm day and taxi onto the runway, hold the yoke full back ,open the throttle and steer the aircraft, hold that wheel back all the way.The aircraft will not rotate until ready to fly.After takeoff let off on the back pressure and fly . The crosswind t.o. is the same By the way if you have not tried so called stalls in your coupe go to altitude,come back on the power, slow to 65 ,push on the power and pull up on the elev.The aircraft should climb straight with an occasional nose dip .Next fromlevel flight power off full up elevator youfeal like ypu are standing still,look at altimiter you are falling like a rock. These manuvers will teach you more about yourcoupe . Glenn putnam , ============================================================================ == To leave this forum go to: http://ercoupers.com/lists.htm ============================================================================ == To leave this forum go to: http://ercoupers.com/lists.htm ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
