Darick,
My mechanic and I made an 0.025" aluminum cover for the opening that
is right under the propellor. This is the ram-air opening to cool the
oil tank. When the cover is installed I get about 30 degrees higher oil
temperature. We mounted my cover with nut plates that are riveted into
the nose cowl.
Syd
[EMAIL PROTECTED] wrote:
All,
Is there an air inlet dam made for any of the three nose cowl
openings? Went flying over the weekend in 50 degree temperatures and
in 30 minutes of crusing, the engine temp. just made it to 150 degrees.
Darick
94139
