Help I am in the process of trying to rig my 415C. I am having problems interpreting the service manual in regards to rigging the ailerons.
I have followed the intructions in the manual up to the point of rigging the aielrons. At the point that I measure the up and down travel of the ailerons is where things become unravelled. At 150 degrees of travel for the yoke, I can only get an upward deflection of the ailerons at about 33 degrees ( the book calls for 50 degrees). Is that reading just to see if the chain is set correctly? I cannot imagine needing to turn the yoke 150 degrees in flight. The manual talks about measuring the distance trom the endrib to the aileron as one and one half inches. If I set the stops at that point, my up deflection is approx. 20 degrees and the down deflection is 9 degrees ( I believe the book calls for 20 and 10). Am I OK there? How do I set this damn rigging? any advise is appreciated. Fred
