Hi Al,

Although I have not gone LSA, I "did" buy a coupe in November and it seems we 
have a lot in common. My coupe has been in/out of the shop ever since, but take 
heart, there is light at the end of the tunnel. I've had mine back for a week 
now and most everything is working the way it should. Oh yeah, I am also at 
about 50% of what I paid as well. There is comfort in the fact you are not 
alone...

Craig Peterson
N87018


----- Original Message ----
From: Albert Flora <[EMAIL PROTECTED]>
To: ercoupe-tech <[email protected]>
Sent: Friday, May 23, 2008 7:52:00 PM
Subject: Re: [ercoupe-tech] Throttle Vernier Control


 
From: Albert Flora 
To: [EMAIL PROTECTED] com 
Sent: Friday, May 23, 2008 7:11 PM
Subject: Re: [ercoupe-tech] Throttle  Vernier Control

Thank you all for the input on the vernier trhottle control,
both the +'s and -"s.
 
Wayne, Your opinion on the matter is exactly as mine. Having used a  vernier 
control over the past 40 years I kind of like it. Now that I have gone  to LSA, 
I am happy to be able to purchase one for my new coupe, which I have  yet to 
fly. I purchased the coupe in Nov of 07 and it is still in the  shop.
Each time it leaves the hanger a new problem comes up and it never gets  off 
the ground. For the people who were talking about the cost of coupe  ownership, 
I am approaching 50% of the cost of the plane that I have yet to  fly and I do 
not mind it as I love my coupe. I will love it more when I get to  fly it in 
about  three weeks.
 
Al Flora
N94748
(HYR)
----- Original Message ----- 
From: [EMAIL PROTECTED] com 
To: [EMAIL PROTECTED] net ; ercoupe-tech@ yahoogroups. com 
Sent: Friday, May 23, 2008 5:57 
PM
Subject: Re: [ercoupe-tech] Throttle  Vernier Control

In a message dated 5/23/2008 3:36:49 P.M. Eastern Daylight Time, [EMAIL 
PROTECTED] net writes:
Some time back there was a posting about  having
a throttle with a vernier control an a coupe.  Can anyone
tell me where I may purchase such a throttle  with a
vernier control?
 
Al Flora
N94748
(HYR)
 
It's a funny  thing.  The man writes in and asks where he can get a vernier 
throttle  control for his airplane, and there are 8 responses, and not one 
response  even begins to answer the question that he asked!  
 
Sometimes this  mailing list reminds me of my favorite poem:
 
Roses are  red,
Violets are  blue,
I like peanut  butter,
Can you  swim?
 
 
 
Al:
 
You can buy a  vernier throttle from Aircraft Spruce & Specialty.  They carry 
ACS  Products Company throttle and mixture cables.  The address for ACS  
Products Company is:
 
 
ACS Products Co,  Inc. 
1585 Copper  Drive
Lake Havasu  CityAZ86403
 
Phone: 928-855-8613
Email: [EMAIL PROTECTED] net 
         
 
The vernier  throttle cable in my Alon is ACS P/N A970-10-0480.  The Aircraft  
Spruce part number was 05-08348 at the time that I ordered it.  I had  to send 
the cable back to ACS products to have it shortened and to have  a threaded 
barrel put on it.  ACS can modify their cables any way you  want for a 
reasonable price.
 
The matching  vernier mixture control was Aircraft Spruce part number 05-08160, 
which is  an A-070 series cable.
 
Your mechanic will  have to figure out what paperwork is required to keep the 
installation  legal.  Mine was installed back in the 1980's with a logbook 
entry by  my A&P/IA at the time.  Let me know if you want any more info.  
 
I know that you  didn’t ask, but everyone else offered their opinion on the 
pros and cons of  vernier throttles, so I might as well add mine.  
 
I like it.  I keep my hand wrapped around the  whole throttle knob.  When I  
want to make large adjustments I basically spueeze the knob in my hand and  the 
palm of my hand pushes in the button and I use my whole hand to push the  knob 
forward.  Once you get used  to it you don’t even think about it.  I never 
screw the throttle in or out more than one or two twists,  except in the 
landing pattern, where a certain numer of twists puts the RPM  exactly where I 
want it turning downwind to base, and base to final.  For any large adjustments 
I just  depress the button and push the knob in or pull it out.  Same hand 
position either way.  When making minor throttle changes,  the vernier works 
great.  At  cruise, I know exactly how much of a twist results in exactly 25 
RPM, so you  can throttle up or throttle back slightly without even looking at 
the  tachometer.
 
This is just a  matter of personal preference and what you get used to.  Either 
way works fine and either way  is perfectly safe. 
 
Just my  opinion.
 
Best Regards,
 
 
Wayne DelRossi
Alon Aircoupe N5618F


"Nobody has  ever scientifically proven that life is supposed to be 
serious."




________________________________
 Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on 
AOL  Food.    


      

Reply via email to